Cru download windows 10.Custom Resolution Utility / CRU – Download for Windows 7/8/10

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Windows XP is not supported, but all others starting with Vista 7, 8. The program was updated on second of July in to version 1.

The layout of the utility provides a list of currently supported resolutions for your monitor with the option to add new ones. Users use Custom Resolution Utility download and can run it without installation. In case you can’t see the screen it is necessary to be acquainted with getting into safe mode. If you don’t have a recovery drive, it is necessary to press and hold the power button to shut off the computer while Windows is booting. Then the monitor will blink and switch or will not switch to the mode you specified.

If the screen does not switch, it means that it does not support the mode that you set and you can restore the standard resolution through remote control, safe mode or recovery mode.

The developers created the Custom Resolution Utility program as a freeware product, but donations for the continued development are highly appreciated. Users may make donations via the developer’s main website. Program version. You need to select a value exceeding the capabilities of your monitor in increase of 3 Hertz. For example, if your monitor produces a maximum of 75 hertz, then you can try increasing the frequency to 78 hertz. Therefore, step by step, you can raise the value until you reach the limit of your monitor; in the program folder, start the restart.

Standard resolutions standard resolutions are limited to Hz. Users should use detailed resolutions to add other refresh rates; they are mostly useful for CRT monitors and for adding lower resolutions with LCD monitors. The driver will ignore other resolutions.

Download Custom Resolution Utility – 1. Related news. Crypto enthusiasts remember the times when it was possible to mine Bitcoin on the usual computer. The history of crypto currencies has roots in the 90s when the first attempts to create a fully digi Leave a Reply Cancel reply.

 
 

 

Cru download windows 10

 

SPM memory support. Improved support of Intel Pentium Overdrive. Fix validation issues. Intel Core 11th generation “Rocket Lake”. Graphics Interface Link current speed and max speed Mainboard tab. MSI Gaming 32 and bit versions. Gigabyte 32 and bit versions.

Asrock Phantom 32 and bit versions. Asrock Taichi 32 and bit versions. Asrock Formula 32 and bit versions. Anonymous February 11th, Install and Remove Since version 1. The installation offers several advantages in comparison to the stand-alone version : The installation creates program entries in the start menu and on the desktop. It installs the right binary x32 or x64 depending on your system.

Installation Run the setup executable file, and let it guide you for the installation process. Configuration file CPU-Z uses a configuration file, cpuz. The cpuz. Note that the use of this file is optional. If no. TextFontSize Size of the font used for the information boxes. TextFontColor Color of the font used for the information boxes. LabelFontSize Size of the font used for the label boxes.

Sensor Set to OFF or 0 disables sensor chip detection and voltages measurement. This concerns BIOS vendor and version, motherboard vendor and revision. This disables chipset, SPD and, depending on the hardware, sensoring information. Default value is Display Set to OFF or 0 disables the video card information reported in the validator. ShowDutyCycles Set to 1, switches the alternate clock computation method based on duty cycles. Example: cpuz.

Report file mysystem. It is then possible to check the speed of each core by running as many instances of CPU-Z as necessary, using batch files for example: cpuz0. This feature is available from version 1. The dialog will always open in this mode. This may help when trying other refresh rates. Exact – Uses non-standard timing parameters to produce exact integer refresh rates.

Exact reduced – Adjusts the “Exact” timing parameters to reduce the pixel clock if possible. This may help when trying higher refresh rates. Reduces the blanking compared with CVT. HDMI 2. Make sure it’s enabled and set to MHz. Do not add the native resolution as a standard resolution.

Other resolutions will be ignored by the driver. These will be listed in gray. Additional resolutions will use up detailed resolution slots. Standard resolutions are limited to certain aspect ratios: , , , Use detailed resolutions for other aspect ratios. The horizontal resolution is limited to and must be a multiple of 8.

Use detailed resolutions for other resolutions. The refresh rate is limited to Hz. Use detailed resolutions for other refresh rates. Use DisplayID to add resolutions greater than x or DisplayID 2. Default extension blocks are placeholders for the monitor’s original extension blocks.

Extension blocks that can’t be read will appear as default extension blocks. Note: NVIDIA does not support default extension blocks and will ignore all changes if a default extension block exists.

NVIDIA also does not support default extension blocks, so delete any default extension blocks and add one manually if needed. The second extension block is usually a DisplayID extension block with detailed resolutions greater than If you need to add an extension block manually, importing one of these files will provide a starting point: hdmi.

For HDMI 2. Export formats:. Command-line options: Exported. Horizontal values can still be reduced if necessary. Skype is known to trigger this problem. Changes in 1. The main difference is how they handle resolutions greater than x 60 Hz and resolutions. Try “Exact reduced” for an alternative. Use “CVT standard” for the old behavior. Added “Exact” and “Exact reduced” to calculate exact integer refresh rates. Added support for tiled display topology data blocks.

Newer versions fix problems and add features. Please report any issues with newer versions that did not exist with older versions. Make sure to run reset-all.

Post: 2. Thank you for making this application, it is very handful! Use the timing options to help fill in the values: “Manual” allows the timing parameters to be set manually.

The dialog will always open in this mode. This may help when trying higher refresh rates. Make sure to override this and set it to MHz.

HDMI 2. Do not add the native resolution as a standard resolution. Other resolutions will be ignored by the driver. These will be listed in gray. Additional resolutions will use up detailed resolution slots. Standard resolutions are limited to certain aspect ratios: , , , Use detailed resolutions for other aspect ratios.

The horizontal resolution is limited to and must be a multiple of 8. Use detailed resolutions for other resolutions. The refresh rate is limited to Hz. Use detailed resolutions for other refresh rates. CRU will automatically add a blank extension block in the registry and. Extension block types: Use CEA unless you need more standard resolutions.

 
 

Custom Resolution Utility (CRU) Download | TechSpot

 
 

The layout of the utility provides a list of currently supported resolutions for your monitor with the option to add new ones. Users use Custom Resolution Utility download and can run it without installation. In case you can’t see the screen it is necessary to be acquainted with getting into safe mode.

If you don’t have a recovery drive, it is necessary to press and hold the power button to shut off the computer while Windows is booting. Then the monitor will blink and switch or will not switch to the mode you specified. If the screen does not switch, it means that it does not support the mode that you set and you can restore the standard resolution through remote control, safe mode or recovery mode.

The developers created the Custom Resolution Utility program as a freeware product, but donations for the continued development are highly appreciated. Please report any issues with newer versions that did not exist with older versions. Make sure to run reset-all. Post: 2. Thank you for making this application, it is very handful!

I used it in win7 without problems, but i just upgraded to win8, and your application doesn’t work there. I can add custom resolutions and everything, but in windows 8 they doesn’t appear. What do you suggest? Post: 3. It should work. Others are using it with Windows 8. What video card and monitor are you using? Post: 4. It worked fine on windows 7. In the list, where i have to choose the monitor, there my monitor appears three times. Is it possible, i choosed the wrong one?

Post: 5. It’s possible you’re editing the wrong one. Each connection creates a separate entry, and there may be outdated entries that aren’t being used anymore. CRU should pick the first active entry it finds, but if you’re not sure which is which, delete all of them and reboot.

Then the list should only have entries that are currently active. You can also try unchecking “Include extension block” if that’s checked. Post: 6. Thanks, i copied the custom resolutions to all three entries, and now works fine. Post: 7. I have an issue not with this tool but rather with my monitor.

Any ideas? Post: 8. Post: 9. I have no resolutions added from nvidia’s control panel. The first resolution under PC is always checked and always matches the current refresh rate. I’m not sure if this is intentional or an oddity. Post: I just checked with a p monitor.

This happens when the refresh rate is set to 59 Hz when only 60 Hz is defined. The HD listing disappears when set to 60 Hz. This stops happening if I change the 60 Hz resolution to something like The monitor information is correct.

Real-time is just the EDID directly from the monitor. The EDID override still takes precedence. English American. ToastyX Administrator. Posts: 4, Joined: Sep Reputation: The F7 key saves the validation cvf file in the current directory. The F9 key switches between CPU clock computation methods.

Cache Latency Computation The cache latency computation tool allows to gather information about the cache hierarchy of the system. For each cache level, it provides its size and its latency. Please note that code caches are not reported. The latency tool can be downloaded here.

Load your system and you will see the frequency increase to its nominal value. CPU-Z causes a general protection fault, or freezes my system, or causes a blue screen. If it works, restore the “1” one by one, until the problem occurs again.

Then send an email and mentioning which “1” is responsible. Why does CPU-Z misreport my memory module specification? The memory theorical bandwidth is computed using the module access time information for the maximal CAS latency value, included in the SPD area.

If the computed bandwidth is lower than the one specified on the memory module, that means that the SPD information on the module is not correctly programmed, or most likely that the bandwidth is not given at the default memory voltage, but at a voltage defined in an extended profile EPP or XMP. Intel Z 1. Intel Rocket Lake preliminary support. Intel Core 10xxx Comet Lake processors. Preliminary support of AMD Ryzen 1. Increased clocks refresh rate.

Fix initialization error on Windows XP and 7. Spectre CVE microcode vulnerabilty in validation page. Intel new Coffee Lake desktop and mobile processors. New timers tool. New “-bench” parameter. Intel X 1. AMD ThreadRipper 1. AMD Ryzen 5 and Ryzen 3. New benchmark version MSI Gaming 32 or bit version.

ROG version 32 or bit version. Gigabyte G1 32 or bit version. Gigabyte OC 32 or bit version. Asrock Formula 32 or bit version.